Maier FXXA0K0200 Performance Leaf Spring Kit, 1964-73 Mustang

Mike Maier Inc. introduces this 165 pound spring rate leaf spring kit for 1964-73 Ford Mustang. This spring is designed to control wheel hop during braking as well as acceleration. The springs are arched to set a ’64-’66 with a 1″ lowering block to roughly an 8″ ride height from the pinch weld under the door. ’67 and up can achieve the same height without lowering blocks. These springs have been designed by the crew at Mike Maier Inc and are manufactured in the U.S. Mike Maier has been designing leaf springs for twenty years and these are the best ones yet!

Bias front leaf pack for elimination of wheel hop
Polyurethane front eyelet bushing
Rubber rear shackle kit
Approximately 8″ (9″ on 1964.5-66) distance from pinch weld to ground using 24.5″ diameter tire